- Table View
- List View
Selected Essays in Monetary Economics (Collected Works of Harry G. Johnson)
by Harry JohnsonThis volume consists of selected previously published key essays which have proved most useful for teaching advanced monetary economics. A short introduction was added which places the selection of essays and the issues they cover in the contemporaneous context of simultaneous high inflation and high unemployment. As relevant today as they were when they were first written, they enable the reader to anticipate intelligently what is likely to happen and why.
Selected International Best Practices in Police Performance Measurement
by Robert C. DavisHistorically, police agencies have measured their performance against a restricted set of crime-focused indicators, but modern police officers must be prepared to take on a wide variety of roles. Performance measures should be multidimensional to capture this complexity. This report describes some key considerations in designing measures to evaluate law enforcement agencies and includes a detailed review of some international best practices.
Selected Issues in Experimental Economics
by Kesra Nermend Małgorzata ŁatuszyńskaTheaim of this volume is to provide deep insights and the latest scientificdevelopments and trends in experimental economics. Derived from the 2015Computational Methods in Experimental Economics (CMEE) conference, this bookfeatures papers containing research and analysis of economic experimentsconcerning research in such areas as management science, decision theory, gametheory, marketing and political science. The goal is to present possibilitiesfor using various computer methods in the scope of experimental economics tofurther provide researchers with a wide variety of tools. Thefield of experimental economics is rapidly evolving. Modern use of experimentaleconomics requires the integration of knowledge in the domains of economicsciences, computer science, psychology, and neuroscience. Recent researchincludes experiments conducted both in the laboratory and in the field, and theresults are used for testing and a better understanding of economic theories. Researchers working in this field use mainly a set of well-established methodsand computer tools that support the experiments. Methods such as artificialintelligence, computer simulation and computer graphics, however, are notrepresented enough in experimental economics studies and most experimenters donot consider their usage. The goal of the conference and the enclosed papers isto allow for an exchange of experiences and to promote joint initiatives toinsight change in this trend.
Selected Papers from the 10th International Conference on E-Business and Applications 2024
by Pui Mun Lee Gyu Myoung LeeThis book brings together original, peer-reviewed research papers from the 2024 10th International Conference on E-Business and Applications, held in Singapore from February 26 to 28, 2024. The papers delve into AI-enabled business innovation, data-driven value creation, and the emerging IoT landscape, providing in-depth insights into these rapidly evolving fields. The book bridges the gap between business intelligence, artificial intelligence, and e-commerce trading technologies, offering a holistic perspective on the intersection of these disciplines. Readers can gain valuable knowledge through real-world examples, data visualization techniques, and business analytics applications, enhancing their understanding of how these concepts translate into tangible business outcomes.
Selected Papers from the Asia Conference on Economics & Business Research 2015
by Stanley SohThe book is a compilation of selected papers presented at the Asia Conference on Economics & Business Research in 2015. The peer-reviewed contributions cover topics such as microeconomics, macroeconomics, financial economics, accounting and economics, organizational behavior, marketing, business ethics, general management, strategic management, operations management and public sector management. The volume serves as a valuable resource for researchers and practitioners in the area of economics and business research in Asia.
Selected Papers from the Asia-Pacific Conference on Economics & Finance (APEF #2016)
by Lee-Ming Tan Evan Lau Jing Hee TanThis book features the best papers presented at the Asia-Pacific Conference on Economics & Finance in 2016. Chapters include research conducted by experts in the field of Economics, Finance and Business from the region. Put together by East Asia Research, East Asia Institute of Management & Universiti Malaysia Sarawak (UNIMAS) , this book serves as a useful resource for educators, researchers, thought leaders, policy makers, and economists.
Selected Papers on Economic Theory (Routledge Library Editions: Landmarks in the History of Economic Thought)
by Knut WicksellThis volume, originally published in 1958, contains a selection of the most important and interesting articles by Knut Wicksell, which had hitherto only been published in Swedish. They cover Wicksell’s views on Economics and monetary theory, his theory of production and distribution, some review articles on the works of Pareto, Böhm-Bawerk, Carl Menger and Bowley and some papers on foreign trade problems, written after the First World War. Erik Lindahl’s introductory essay gives a picture of Wicksell the social reformer, who radical opinions often brought him into conflict with the authorities and the general public.
Selected Payout Products of the Old-Age Pension Saving Scheme (SpringerBriefs in Statistics)
by Jana Špirková Igor Kollár Gábor Szűcs Pavel ZimmermannThis book discusses the payout phase of the old-age pension saving scheme, the so-called effective premium, and offers detailed actuarial models and analyses of five old-age pension saving products used in practice. These include the basic permanent monthly annuity, without any benefits for survivors, as well as products which, in addition, also include benefits for survivors or authorized persons in the event of the pensioner’s death. The purpose of the book is to point out the method of determining future old-age pensions from old-age pension savings, and to present the advantages and disadvantages of such a pension. The book also emphasizes the role of the profitability testing of the products and answers questions concerning the effectiveness of old-age pension savings and insurance. The book is primarily intended for students of actuarial and financial mathematics and future economists.
Selected Perspectives on Platforms in E-Commerce Ecosystems: Recommendations for the Design and Management of Boundary Resources and Guidance on the Orchestration of Ecosystem Participants
by Tobias WulfertDigital platforms hold significant economic value, enriching various industry sectors. While they are pivotal in driving value creation and capture, it is not solely their technological prowess that underpins their economic significance. Rather, their effectiveness lies in their integration within business ecosystems. In this study, Tobias Wulfert examines digital platforms in the context of e-commerce through five lenses: · Enterprise architecture · Boundary resources · Application lifecycle · Dynamic capabilities · Value creation This analysis focuses on different e-commerce platform types, developing an architectural framework and a taxonomy for classification. The author also delineates e-commerce ecosystem architectures, emphasizing the role of platforms as central components and the involvement of peripheral ecosystem participants. He explores boundary resources as crucial interfaces between platforms and ecosystem participants. He further suggests a reference procedure model for the management of these boundary resources. Furthermore, he delves into the dynamic capabilities necessary for effective ecosystem orchestration, identifying configurations of dynamic capabilities that can confer sustainable competitive advantages.
Selected Proceedings of the 1st International Conference on Advanced Materials for Sustainable Innovation; IC-AMSI 2024; 28–30 August; New Delhi; India: Harnessing Sustainable Energy Technologies for Effective Decarbonization (Springer Proceedings in Energy)
by Brian Norton G. N. Tiwari Anil Kumar Deepak TiwariThis book presents peer-reviewed articles from the 1st International Conference on Advanced Materials for Sustainable Innovation (IC-AMSI 2024) held on Aug 28–30 in New Delhi, India. It delves into four key themes shaping the future of sustainable energy as follows: Emerging Technologies for Clean Energy Production: It explores the forefront of renewable energy research. Cutting-edge advancements in renewable sources, energy storage, and smart grids are unveiled, promising enhanced efficiency and sustainability in energy production. Integration of Sustainable Solutions in Energy Systems: Through meticulous analysis, it highlights the seamless incorporation of sustainable technologies into existing energy infrastructures. Emphasis is placed on optimizing energy systems to maximize their impact on decarbonization. Digitalization and Smart Energy Management: It investigates the transformative role of digital technologies, artificial intelligence, and smart energy management. This section illuminates how these innovations revolutionize energy consumption patterns, playing a pivotal role in minimizing carbon footprints. Policy and Regulatory Frameworks for Decarbonization: Readers gain insights into the evolving landscapes of policies and regulatory frameworks that underpin the deployment of sustainable energy technologies. The exploration of these frameworks creates a conducive environment for the effective implementation of decarbonization strategies. &“Innovative Pathways&” offers a multidimensional perspective, uniting technological exploration with strategic insights to guide the future of sustainable energy initiatives.
Selected Proceedings of the 2nd International Engineering Research Symposium; IERS 2024; 14 Aug; Colombo, Sri Lanka: Engineering Innovations for Economic Transformation (Proceedings in Technology Transfer)
by Ranjith Dissanayake Meththika Vithanage Pradeep Gajanayake T. Nilanthi Fernando Manjula Siriwardhana Jayathu G. SamarawickramaThis book presents selected peer reviewed articles from the 2nd International Engineering Research Symposium- IERS 2024, held at Colombo in Sri Lanka, under the theme of 'Engineering Innovations for Economic Transformation”. It highlights the latest advancements in engineering research, innovations, and technological principles aimed at driving economic changes and improvements within society and the industry. IERS2024 covers the areas of Agricultural Engineering, Chemical Engineering, Civil Engineering, Computer Science & Engineering, Electrical Engineering, Electronics & Telecommunication Engineering, Mechanical & Mechatronics Engineering, Materials Science & Engineering, Manufacturing & Process Engineering, and other Engineering discipline relevant to the theme of IERS 2024.
Selected Profitability Data on U.S. Industries and Companies
by Anita M. McgahanDescribes the importance of industry structure and competitive positioning to the profitability of U.S. corporations between 1981 and 1994. Cites recent research indicating that persistent industry differences and persistent competitor differences account for 19% and 32%, respectively, of variation in profit. Additional evidence is developed to show the relationship between industry-average performance and competitor differences.
Selected Sections: Federal Income Tax Code and Regulations, 2013-2014
by Steven A. Bank Kirk J. StarkThis best-selling statutory supplement provides selected federal income tax statutes, including edited sections and significant amendments, additions, and revisions. Designed to offer maximum flexibility and ease-of-use in dealing with individual federal income tax, this resource includes key provisions of the Internal Revenue Code, as well as Treasury regulations pertaining to the federal income tax. The closely-edited material is especially designed for law students studying for the basic federal income tax class.
Selected Studies in Geophysics, Tectonics and Petroleum Geosciences: Proceedings of the 3rd Conference of the Arabian Journal of Geosciences (CAJG-3) (Advances in Science, Technology & Innovation)
by Sandeep Panda Broder Merkel Stefan Grab Sami Khomsi Amjad Kallel Santanu Banerjee Haroun Chenchouni Mehdi Eshagh Maurizio Barbieri Ali Cemal Benim Mourad BezzeghoudThis edited book is based on the best papers accepted for presentation during the 3rd Springer Conference of the Arabian Journal of Geosciences (CAJG-3). It is of interest to all researchers practicing geophysics/seismology, structural, and petroleum geology. It includes a set of research studies spanning a large spectrum of geological and geophysical topics with particular reference to Middle East, Mediterranean region, and Africa. It also presents a series of research methods that are nowadays in use for measuring, quantifying, and analyzing several geological domains. Papers cover new research studies on earthquake geodesy, seismotectonics, archeoseismology and active faulting, well logging methods, geodesy and exploration/theoretical geophysics, petroleum geochemistry, petroleum engineering, structural geology, basement architecture and potential data, tectonics and geodynamics, and thermicity, petroleum, and other georesources. The book follows a multidisciplinary approach which combined with the geodynamics of tectonic provinces and investigations of potential zones of natural resources (petroleum reservoirs) provides the basis for a more sustainability in the economic development.
Selected Themes in African Development Studies
by Lucky Asuelime Suzanne Francis Joseph YaroAgainst the background of realities of underdevelopment and economic growth, environmental pressures and global governance challenges, this volume presents a broad picture of contemporary issues in African development. The multi-disciplinary collection presents a variety of important themes, covering land questions, housing, water, health, economic liberalization, climate, environment, and gender. The specific country studies illustrate the diversity of the African continent and demonstrate how unique contexts impact upon different levels of achievement. The volume seeks to present and promote novel analytical frameworks, new conceptual approaches, and empirical accounts of relevance to scholars studying Africa as well as practitioners in African development and policy makers.
Selected Themes in African Political Studies
by Lucky Asuelime Suzanne FrancisAgainst the background of a long and continuing record of political instability in Africa, this edited collection presents a multi-disciplinary approach to selected issues in African political studies. The contributions explore a range of political and conflict situations, discuss efforts to develop indigenous conflict resolution mechanisms and consider some of the key political and economic issues facing the continent. The specific country studies illuminate the diversity of the African continent and indicate the ways in which the political and socio-economic contexts of African states bear directly upon the ability of states to solve political and economic challenges. The volume seeks to present and promote novel analytical frameworks, conceptual approaches and empirical accounts of relevance to scholars working on Africa and to practitioners and policy makers in politics, governance and peace initiatives in Africa.
Selected Topics in Manufacturing: AITeM Young Researcher Award 2019 (Lecture Notes in Mechanical Engineering)
by Elisabetta Ceretti Tullio TolioThis book presents selected contributions on a wide range of scientific and technological areas covered by AITeM (the Italian Association of Manufacturing). It discusses the following topics: additive manufacturing, advanced and unconventional machining and processes, material removal processes, foundry and forming, tools and machine tools, assembly/disassembly, joining materials and material properties, quality metrology and material testing, manufacturing systems engineering, sustainable manufacturing, smart manufacturing and cyber-physical systems, education in manufacturing and human factors, industrial applications. Written by young AITeM associates, the contributions reflect the multifaceted nature of the research in manufacturing, which takes advantage of emergent technologies and establishes interdisciplinary connections with various scientific and technological areas to move beyond simple product fabrication and develop a complex and highly interconnected value creation processes ecosystem pursuing high-value-added products to compete globally.
Selected Topics in Statistical Inference: Theory and Applications
by Manisha Pal Bikas K. SinhaThis book focuses exclusively on the domain of parametric inference and that, too, from a reader’s perspective, i.e., covering only point estimation of parameter(s). It covers those topics in parametric inference which need clarity of exposure to students, researchers, and teachers alike; mere statements of theorems and proofs may not always reveal the inner beauty and significance of some aspects of inference. To ensure clarity, the book discusses the following topics at an advanced level—(1) sequential (unbiased) point estimation of ‘p’ and its functions; generalization to trinomial and tetranomial populations; (2) some aspects of the use of additional resources in finite population inference; (3) the concept of sufficiency vis-à-vis the notion of sufficient experiments and comparison of experiments; (4) estimation of the size of a finite population with special features; and (5) unbiased estimation of reliability in exponential samples and other settings. This book provides a platform for thought-provoking, creative, and challenging discussions on a variety of topics in statistical estimation theory, it is also ideal for research methodology course for statistics research scholars, and for clarification of basic ideas in topics discussed at basic/advanced levels.
Selected Writings on the State and the Transition to Socialism
by Stephen F. Cohen Ken Coates Richard B. Day N. BukharinUnderlying current controversies about environmental regulation are shared concerns, divided interests and different ways of thinking about the earth and our proper relationship to it. This book brings together writings on nature and environment that illuminate thought and action in this realm.
Selecting Safeguards: Tailoring the Decision Process to Guard against Bad Decisions
by Sydney Finkelstein Jo Whitehead Andrew CampbellThe best way to reduce the risk of making a flawed decision is to identify safeguards that will help you avoid the effects of distorted thinking. Safeguards might expand the experience or information available to the decision maker; they might ensure that the logic of the decision is challenged and debated; they might have the power to reject proposals; or, they might make it easier to change the decision if the early outcomes are unfavorable. But how much is enough? Too many safeguards can overburden your decisions with too much analysis, too many challenges, or too much governance. This chapter provides practical advice for identifying the right safeguards to counterbalance potential risks and for ensuring that you don't overdo it. This chapter was originally published as chapter 10 of "Think Again: Why Good Leaders Make Bad Decisions and How to Keep It From Happening to You."
Selecting Your Competitive Terrain: Employing an Entrepreneurial Mindset
by Rita Gunther Mcgrath Ian Macmillan Timothy A. Luehrman Joel L. HeilprinIn order to succeed in the current tumultuous business environment, strategists need to adopt the nimble thought process and discipline that are second nature to successful entrepreneurs. This entrepreneurial mindset will help you identify new opportunities. But how do you decide which opportunities to pursue and which to defer? This chapter shows you how to first target attractive arenas in the competitive terrain that represent your best chances for profitable growth, and then decide how to prioritize the opportunities in each of your selected arenas. This chapter is excerpted from "The Entrepreneurial Mindset: Strategies for Continuously Creating Opportunity in an Age of Uncertainty."
Selecting Your Employer
by Gordon BingSelecting and evaluating jobs and employers is a task for which few are well prepared, yet the process of changing jobs requires major personal decisions. Improving the outcome involves evaluating the job, the employer, and the community in a systematic and comprehensive manner to determine both desirable and undesirable factors. All employment decisions are made in the context of comparing one's present situation with alternatives. This book will provide the tools to evaluate a present or potential job, employer or community. Business consultant Gordon Bing draws on his years of experience to guide the reader to develop a plan of action, to identify critical factors such as personal goals, cultural factors, employment environment, job descriptions, company position, industry climate, and compensation and benefits that will result in a successful match for both the employee and the employer.
Selecting a New Name for Security Capital Pacific Trust
by Susan Fournier Andrea WojnickiA methodology for selecting a new corporate brand name is explored, highlighting different types of names, criteria and hurdles in securing new names, and legal implications. Brand identity consultancy Lippincott & Margulies guided a real estate investment trust company through the process of selecting a new corporate brand name.
Selecting and Executing Your Entry Strategy: Employing an Entrepreneurial Mindset
by Rita Gunther Mcgrath Ian Macmillan Neeraj Bharadwaj Phillip D. DelurgioOnce you have made the decision to pursue a strategic opportunity, the danger isn't over--new and changing business models imply new customers, competitors, and competences. How can you capture the opportunity without falling prey to many of the pitfalls of high uncertainty? The first step is to consider your entry strategy. This chapter analyzes which market segments you should target first and describes how to anticipate competitive behavior and response. This chapter is excerpted from "The Entrepreneurial Mindset: Strategies for Continuously Creating Opportunity in an Age of Uncertainty."
Selection Management for Systems and Services
by Jacquie WakefordA fast, simple and robust process for selection Selecting a new system or service can be a crucial business decision, but small and medium size enterprises (SMEs) often lack experience of the selection process. Formal procurement usually involves days, weeks or even months producing a specification, followed by a tender and selection process, but this may not always be appropriate for the smaller organisation, and is rarely practical for SMEs that do not have (or need) a full-time procurement expert. Selection Management for Systems and Services offers a simplified, tried and tested process based on a standard set of steps, from defining the original requirements right through to selection and implementation. The process is robust enough to maintain a reasonable level of due diligence, and its flexibility allows it to be tailored to suit each organisation's specific needs. Although primarily aimed at selecting IT systems or services, the processes and techniques described in this book are generic and can be adapted to the selection of non-IT services or products. Jacquie Wakeford has nearly 25 years' experience in IT, which has been gained in various roles across a number of sectors, including the post of Head of ICT at a national charity. For the last five years, she has been running Miriona Ltd, an independent IT management consultancy whose client assignments frequently involve assistance with system and service selection.