- Table View
- List View
Advanced X-ray Imaging of Electrochemical Energy Materials and Devices
by Jiajun WangThis book comprehensively outlines synchrotron-based X-ray imaging technologies and their associated applications in gaining fundamental insights into the physical and chemical properties as well as reaction mechanisms of energy materials. In this book the major X-ray imaging technologies utilised, depending on research goals and sample specifications, are discussed. With X-ray imaging techniques, the morphology, phase, lattice and strain information of energy materials in both 2D and 3D can be obtained in an intuitive way. In addition, due to the high penetration of X-rays, operando/in situ experiments can be designed to track the qualitative and quantitative changes of the samples during operation. This book will broader the reader’s view on X-ray imaging techniques and inspire new ideas and possibilities in energy materials research.
Advanced and Applied Studies on Ultra-Trace Rare Earth Elements (Springer Theses)
by Chung-Che WuThis book provides two state-of-the-art quantitative techniques to determine ultra-trace rare earth elements (REEs) in natural carbonates using solution nebulization-inductively coupled plasma mass spectrometry (SN-ICPMS) and laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) with respective applications were presented in this dissertation. These techniques were applied to natural carbonates, including corals and stalagmites, to understand volcano eruptions and the impacts on modern biosystem and paleoclimate regimes. In the first SN-ICPMS protocol, direct measurements for femtogram quantity carbonate samples without chemical separation steps can offer accurate and high-precision analysis (±1.9-6.5%, 2σ) with a high sample throughput of 8-10 samples/hr routinely. Application to modern Porites corals collected from South China Sea region, the anomalies of REE contents and Al/Ca ratios associated with micro-domain images, register modern coral reefs could be exacerbated by volcanic eruptions. In the second protocol, a high-sensitivity quantitative open-cell LA-ICPMS technique has been established to allow direct sampling on stalagmite surface in the atmospheric air. This technique improved limits of detection down to sub-ng/g range and promises analyses of carbonate REE profiles at the single digit parts-per-billion (ppb) levels. Application to a 15-cm stalagmite collected from East Timor reveals two peaks of REE contents by at least one order of magnitude, possibly due to volcanic ash preserved in stalagmite. Both improved SN-ICPMS and LA-ICPMS techniques highlight the high-sensitivity and high-temporal-resolution carbonate REE analyses for corals and stalagmites, with great potential to other natural carbonates such as travertine, tufa, and flowstone, benefit our understanding of paleoclimatic and paleoenvironmental dynamics.
Advanced and Emerging Technologies for Resource Recovery from Wastes (Green Chemistry and Sustainable Technology)
by Chunbao (Charles) Xu Laleh Nazari Madhumita B. RayThis book introduces advanced or emerging technologies for conversion of wastes into a variety of high-value chemicals and materials. Energy and resources can be recovered from various residential, industrial and commercial wastes, such as municipal wastewater and sludge, e-waste, waste plastics and resins, crop residues, forestry residues and lignin. Advanced waste-to-resource and energy technologies like pyrolysis, hydrothermal liquefaction, fractionation, de-polymerization, gasification and carbonization are also introduced. The book serves as an essential guide to dealing with various types of wastes and the methods of disposal, recovery, recycling and re-use. As such it is a valuable resource for a wide readership, including graduate students, academic researchers, industrial researchers and practitioners in chemical engineering, waste management, waste to energy and resources conversion and biorefinery.
Advanced and Emerging Technologies in Radiation Oncology Physics (Series in Medical Physics and Biomedical Engineering)
by Siyong Kim John W. WongThis new book educates readers about new technologies before they appear in hospitals, enabling medical physicists and clinicians to prepare for new technologies thoroughly and proactively, and provide better patient care once new equipment becomes available. Emerging technologies in imaging, treatment planning, treatment delivery, dosimetry and informatics are all discussed. The book is divided into three parts: recently developed technologies available for practice; technologies under development nearing completion; and technologies in an early stage of development that could have potential radiotherapy applications. Features: Introduces emerging technologies in imaging, treatment planning, treatment delivery, dosimetry and informatics The advantages and limitations of each technology in clinical settings are discussed, and recommendations on how to adopt the technologies are provided Critiques and improvement points are provided for researchers, in addition to suggestions on how to prepare quality assurance are provided as needed
Advanced and Innovative Approaches of Environmental Biotechnology in Industrial Wastewater Treatment
by Maulin P. ShahThis book discusses new and innovative trends and techniques in the removal of toxic and refractory pollutants by means of various microbial biotechnology processes from wastewater, both on the laboratory and industrial scales. The book also highlights the main factors contributing to the removal of toxic pollutants as well as recycling, environmental impact, and wastewater policies after heavy metal removal. In addition, it assesses the potential application of several existing bioremediation techniques and introduces new cutting-edge emerging technologies. This book significantly contributes to the wastewater treatment plant industry so that the treatment systems can serve better and more resiliently for the purpose. This book is designed for engineers, scientists, and other professionals who are seeking introductory knowledge of the principles of environmental bioremediation technology and for students who are interested in the environmental microbiology and bioremediation fields.
Advanced and Intelligent Computations in Diagnosis and Control (Advances in Intelligent Systems and Computing #386)
by Zdzisław KowalczukThis book is devoted to the demands of research and industrial centers for diagnostics, monitoring and decision making systems that result from the increasing complexity of automation and systems, the need to ensure the highest level of reliability and safety, and continuing research and the development of innovative approaches to fault diagnosis. The contributions combine domains of engineering knowledge for diagnosis, including detection, isolation, localization, identification, reconfiguration and fault-tolerant control. The book is divided into six parts: (I) Fault Detection and Isolation; (II) Estimation and Identification; (III) Robust and Fault Tolerant Control; (IV) Industrial and Medical Diagnostics; (V) Artificial Intelligence; (VI) Expert and Computer Systems.
Advanced and Intelligent Control in Power Electronics and Drives (Studies in Computational Intelligence #531)
by José Rodríguez Frede Blaabjerg Teresa Orłowska-KowalskaPower electronics and variable frequency drives are continuously developing multidisciplinary fields in electrical engineering and it is practically not possible to write a book covering the entire area by one individual specialist. Especially by taking account the recent fast development in the neighboring fields like control theory, computational intelligence and signal processing, which all strongly influence new solutions in control of power electronics and drives. Therefore, this book is written by individual key specialist working on the area of modern advanced control methods which penetrates current implementation of power converters and drives. Although some of the presented methods are still not adopted by industry, they create new solutions with high further research and application potential. The material of the book is presented in the following three parts: Part I: Advanced Power Electronic Control in Renewable Energy Sources (Chapters 1-4), Part II: Predictive Control of Power Converters and Drives (5-7), Part III: Neurocontrol and Nonlinear Control of Power Converters and Drives (8-11). The book is intended for engineers, researchers and students in the field of power electronics and drives who are interested in the use of advanced control methods and also for specialists from the control theory area who like to explore new area of applications.
Advanced and Multivariate Statistical Methods: Practical Application and Interpretation
by Craig A. Mertler Rachel Vannatta Reinhart* All the statistics traditionally covered in a second-level course are included. * Stresses the conceptual and practical aspects for students who do not need emphasis on the underlying mathematical theory. * Students learn not only the purpose of and how to compute the statistics using SPSS, they also learn the logic behind the techniques and how to test the underlying assumptions. * Students are shown how to interpret, present, and write up the results for each technique. * Exercises allow students to practice their newly acquired skills. The answer key will be provided with professors' copies. * If your students are overwhelmed by advanced statistics texts that are too technical and mathematical, you should examine this highly applied approach to multivariate statistics. Covers why, what, when and how. Ideal for nonmath majors. * The numerous screenshots and examples of output make it easy for students to follow the text. * Each statistical method is followed by an explanation of why a student might use that method, including a discussion of its purpose and sample research questions it can address. * The authors also show a sample study with an example of how to write up the results. Students see firsthand how to present their statistical findings. * Although SPSS is the program that is illustrated, students using any program will benefit greatly from the conceptual material.
Advanced and Multivariate Statistical Methods: Practical Application and Interpretation
by Craig A. Mertler Rachel A. Vannatta Kristina N. LaVeniaAdvanced and Multivariate Statistical Methods, Seventh Edition provides conceptual and practical information regarding multivariate statistical techniques to students who do not necessarily need technical and/or mathematical expertise in these methods. This text has three main purposes. The first purpose is to facilitate conceptual understanding of multivariate statistical methods by limiting the technical nature of the discussion of those concepts and focusing on their practical applications. The second purpose is to provide students with the skills necessary to interpret research articles that have employed multivariate statistical techniques. Finally, the third purpose of AMSM is to prepare graduate students to apply multivariate statistical methods to the analysis of their own quantitative data or that of their institutions. New to the Seventh Edition All references to SPSS have been updated to Version 27.0 of the software. A brief discussion of practical significance has been added to Chapter 1. New data sets have now been incorporated into the book and are used extensively in the SPSS examples. All the SPSS data sets utilized in this edition are available for download via the companion website. Additional resources on this site include several video tutorials/walk-throughs of the SPSS procedures. These "how-to" videos run approximately 5–10 minutes in length. Advanced and Multivariate Statistical Methods was written for use by students taking a multivariate statistics course as part of a graduate degree program, for example in psychology, education, sociology, criminal justice, social work, mass communication, and nursing.
Advanced and Multivariate Statistical Methods: Practical Application and Interpretation Fifth Edition
by Craig A. Mertler Rachel A. Vannatta* All the statistics traditionally covered in a second-level course are included. * Stresses the conceptual and practical aspects for students who do not need emphasis on the underlying mathematical theory. * Students learn not only the purpose of and how to compute the statistics using SPSS, they also learn the logic behind the techniques and how to test the underlying assumptions. * Students are shown how to interpret, present, and write up the results for each technique. * Exercises allow students to practice their newly acquired skills. The answer key will be provided with professors' copies. * If your students are overwhelmed by advanced statistics texts that are too technical and mathematical, you should examine this highly applied approach to multivariate statistics. Covers why, what, when and how. Ideal for nonmath majors. * The numerous screenshots and examples of output make it easy for students to follow the text. * Each statistical method is followed by an explanation of why a student might use that method, including a discussion of its purpose and sample research questions it can address. * The authors also show a sample study with an example of how to write up the results. Students see firsthand how to present their statistical findings. * Although SPSS is the program that is illustrated, students using any program will benefit greatly from the conceptual material.
Advanced and Refractory Ceramics for Energy Conservation and Efficiency: Ceramic Transactions, Volume 256
by Mrityunjay Singh Tatsuki Ohji Hua-Tay Lin Alexander Michaelis James HemrickThis volume contains a collection of 19 papers from the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada. Papers were presented in the below five symposia from Track 2 on the topic of Ceramics for Energy Conservation and Efficiency: Advanced Ceramics and Composites for Gas Turbine Engines Advanced Refractory Ceramic Materials and Technologies Advanced Ceramic Coatings for Power Systems Energy Efficient Advanced Bearings and Wear Resistant Materials Advanced Nitrides and Related Materials for Energy Applications
Advanced iOS 4 Programming
by Maher AliWith Advanced iOS 4 Programming, developers have the expert guidance they need to create amazing applications for Apple's iPhone, iPad, and iPod touch.Inside, veteran mobile developer Dr. Maher Ali begins with a foundation introduction to Objective C and Cocoa Touch programming, and then guides readers through building apps with Apple's iPhone SDK 4 - including coverage of the major categories of new APIs and building apps for the new Apple iPad.This book concentrates on illustrating GUI concepts programmatically, allowing readers to fully appreciate the complete picture of iOS 4 development without relying on Interface Builder. In addition, Interface Builder is covered in several chapters.Advanced iOS 4 Programming delves into more advanced topics going beyond the basics of iOS 4 development, providing comprehensive coverage that will help you get your apps to the App Store quicker.Key features include:Objective-C programming language and runtimeInterface BuilderBuilding advanced mobile user interfacesCollectionsCocoa TouchCore Animation and Quartz 2DModel-view-controller (MVC) designsDeveloping for the iPadGrand Central DispatchParsing XML documents using SAX, DOM, and TouchXMLWorking with the Map Kit APIRemote and Local Push NotificationBlocks (closures) in Objective-CBuilding advanced location-based applicationsDeveloping database applications using the SQLite engineGameKit framework
Advanced in Creative Technology- added Value Innovations in Engineering, Materials and Manufacturing: Proceedings of the 11th International Conference on Creative Technology ICCT 2023 (Lecture Notes in Networks and Systems #979)
by Anna Burduk Saichol Chujuarjeen Pichai Janmanee Suthep Butdee Phatchani Srikhumsuk Andre D.L. Batako M. Anthony XaviorThe 11th International Conference on Creative Technology (ICCT2023): To Added Value Innovations in Engineering, Materials and Manufacturing was held in Rajamangala University of Technology Krungthep, 2 Nanglinchi Road, Thungmahamek, Sathorn, Bangkok, Thailand, between July 20 and 22, 2023. The conference was organized by three universities from three countries, namely Rajamangala University of Technology Krungthep (RMUTK, Thailand), Vellore Institute of Technology (VIT, India), and Liverpool John Moores University (LJMU, England). The conference aimed to give an opportunity for students, government organizations, private sectors, and universities to exchange experiences in advances in materials and manufacturing, simulation, automation, optimization of production processes, production management, maintenance, simulation, Industry 4.0, AI, and robotics. This book presents a collection of 58 peer-reviewed papers. The organizers received 61 contributions from 12 countries around the world. After a thorough peer-review process, the committee accepted 33 papers for conference proceedings prepared by 142 authors from 11 countries (acceptance rate of around 54%).
Advanced interactive interfaces with Access: Building Interactive Interfaces with VBA
by Alessandro GrimaldiExplore and learn advanced techniques for working with graphical, interactive interfaces that can be built in Access. This book starts with best practices and tips to write code using VBA, and covers how to implement them in a real-world scenario. You will learn how to create and use VBA classes. An introduction to the binary code and the "bit vector" technique is discussed, followed by the implementation of a drag-and-drop engine. You also will learn how to design a timeline, and make it scrollable. What You Will Learn Write readable, easy-to-maintain code Add a drag-and-drop engine to an Access application Apply variations to the drag-and-drop technique to create different graphical effects Embed a scrollable timeline in an Access application, on which objects can be dynamically placed Who This Book Is For VBA developers
Advanced methods for fault diagnosis and fault-tolerant control
by Steven X. DingThe major objective of this book is to introduce advanced design and (online) optimization methods for fault diagnosis and fault-tolerant control from different aspects. Under the aspect of system types, fault diagnosis and fault-tolerant issues are dealt with for linear time-invariant and time-varying systems as well as for nonlinear and distributed (including networked) systems. From the methodological point of view, both model-based and data-driven schemes are investigated.To allow for a self-contained study and enable an easy implementation in real applications, the necessary knowledge as well as tools in mathematics and control theory are included in this book. The main results with the fault diagnosis and fault-tolerant schemes are presented in form of algorithms and demonstrated by means of benchmark case studies. The intended audience of this book are process and control engineers, engineering students and researchers with control engineering background.
Advanced Łukasiewicz calculus and MV-algebras (Trends in Logic #35)
by D. MundiciThis is a continuation of Vol. 7 of Trends in Logic. It wil cover the wealth of recent developments of Lukasiewicz Logic and their algebras (Chang MV-algebras), with particular reference to (de Finetti) coherent evaluation of continuously valued events, (Renyi) conditionals for such events, related algorithms.
Advanced, Contemporary Control: Proceedings of KKA 2020—The 20th Polish Control Conference, Łódź, Poland, 2020 (Advances in Intelligent Systems and Computing #1196)
by Andrzej Bartoszewicz Janusz Kacprzyk Jacek KabzińskiThis book presents the proceedings of the 20th Polish Control Conference. A triennial event that was first held in 1958, the conference successfully combines its long tradition with a modern approach to shed light on problems in control engineering, automation, robotics and a wide range of applications in these disciplines. The book presents new theoretical results concerning the steering of dynamical systems, as well as industrial case studies and worked solutions to real-world problems in contemporary engineering. It particularly focuses on the modelling, identification, analysis and design of automation systems; however, it also addresses the evaluation of their performance, efficiency and reliability. Other topics include fault-tolerant control in robotics, automated manufacturing, mechatronics and industrial systems. Moreover, it discusses data processing and transfer issues, covering a variety of methodologies, including model predictive, robust and adaptive techniques, as well as algebraic and geometric methods, and fractional order calculus approaches. The book also examines essential application areas, such as transportation and autonomous intelligent vehicle systems, robotic arms, mobile manipulators, cyber-physical systems, electric drives and both surface and underwater marine vessels. Lastly, it explores biological and medical applications of the control-theory-inspired methods.
Advanced, Contemporary Control: Proceedings of the XXI Polish Control Conference, Gliwice, Poland, 2023. Volume 1 (Lecture Notes in Networks and Systems #708)
by Janusz Kacprzyk Marek Pawelczyk Dariusz Bismor Szymon OgonowskiThis book introduces the reader to the hottest topics in current control sciences and robotics, as seen by scientists from Poland and other European countries. Volume 1 comprises 37 chapters, which specifically address topics connected to modeling, identification, and analysis of automation systems, to design of control systems, and to fault diagnosis and fault-tolerant control. The contributions were presented during XXI Polish Control Conference, held in Gliwice, Poland, from June 26 to 29, 2023. This book is extremely useful to all persons who want to know the latest trends in automation and robotics.
Advanced, Contemporary Control: Proceedings of the XXI Polish Control Conference, Gliwice, Poland, 2023. Volume 2 (Lecture Notes in Networks and Systems #709)
by Janusz Kacprzyk Marek Pawelczyk Dariusz Bismor Szymon OgonowskiThis book introduces the reader to the hottest topics in current control sciences and robotics, as seen by scientists from Poland and other European countries. Volume 2 comprises 42 chapters, which specifically address topics connected to statistical and stochastic methods in control engineering applications, to optimization and quantum computing, to biological, medical, and ecological systems, to new applications of artificial intelligence and machine learning in automated and connected vehicles, to design and control of autonomous marine, robotics, and vehicles systems, and to other modern topics. The contributions were presented during XXI Polish Control Conference, held in Gliwice, Poland, from June 26 to 29, 2023. This book is extremely useful to all persons who want to know the latest trends in automation and robotics.
Advancement
by Chuck KlostermanOriginally collected in Chuck Klosterman IV and now available both as a stand-alone essay and in the ebook collection Chuck Klosterman on Living and Society, this essay is about advancement.
Advancement in Computational Methods for Life Systems Modelling and Simulation: 8th International Conference on Life System Modeling and Simulation, LSMS 2024 and 8th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2024, Suzhou, China, September 13–15, 2024, Proceedings, Part I (Communications in Computer and Information Science #2216)
by Xin Li Jingjing Zhang Qun Niu Minrui Fei Hongjie WuThe five-volume set constitutes the thoroughly refereed proceedings of the 8th International Conference on Life System Modeling and Simulation, LSMS 2024, and of the 8th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2024, which were held during September 13-15, in Suzhou, China. The 35 papers presented were carefully reviewed and selected from over 496 submissions. The LSMS and ICSEE international conference series aim to bring together international researchers and practitioners in the fields of advanced methods for life system modeling and simulation, as well as advanced intelligent computing theory, methodologies, and engineering applications in achieving net zero across all sectors to tackle the global climate change challenge.
Advancement in Emerging Technologies and Engineering Applications (Lecture Notes in Mechanical Engineering)
by Chun Lin Saw Tze Keong Woo Salvinder Singh a/l Karam Singh Didi Asmara Bin SalimThis volume contains selected and reviewed manuscripts from the 2nd Regional Conference on Mechanical and Marine Engineering (ReMME 2018), ‘Sustainable Through Engineering,’ which was held from November 7 to 9, 2018, at the Ipoh, Perak, Malaysia. This conference was organized by the Center of Refrigeration and Air Conditioning (CARe) and Center of Marine Engineering (CTME) Politeknik Ungku Omar, Jalan Raja Musa Mahadi, 31400 Ipoh, Perak. It discusses the expertise, skills, and techniques needed for the development of energy and renewable energy system, new materials and biomaterials, and marine technology. It focuses on finite element analysis, computational fluids dynamics, programming and mathematical methods that are used for engineering simulations, and present many state-of-the-art applications. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials. These composite materials are often exposed to harsh environments, must deliver specific characteristics, and are primarily used in automotive and marine technologies, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. An energy efficient methods such cogeneration, thermal energy storage and solar desalination also being highlighted as sustainable engineering in this book chapter. The committee members can be listed as follows: Patron:Dr. Hj. Zairon Mustapha (Director). Advisor: Muhmmad Zubir Mohd Hanifah (Deputy Director Academic), Dr. Azhar Abdullah (Head of Innovation, Research & Commercialization). Chairman 1: Dr. Adzuieen Nordin. Chairman 2: Hairi Haizri Che Amat. Secretariat 1: Dr. Woo Tze Keong. Secretariat 2: Dr. Saw Chun Lin. Secretary: Mahani Mohd Zamberi, Maslinda Rahmad. Floor Manager: Dr. Adzuieen Nordin, Marzuki Mohammad Treasurer: Shahrul Nahar Omar Kamal. Webmaster: Mohamad Asyraf Othoman, Mohd Assidiq Che Ahmad, Mohd Hashim Abd. Razak. Proceeding & Editorial: Didi Asmara Salim, Khairil Ashraf Ahmad Maliki, Khirwizam Md Hkhir. Publicity: Nur Azrina Zainal Ariff, Norsheila Buyamin, Rawaida Muhammad, Noor Khairunnisa Kamaruddin. Reviewer: Zakiman Zali, Shahril Jalil. Technical Manager: Mohd Faisol Saad. Springer Publication Editorial: Dr. Saw Chun Lin, Dr. Woo Tze Keong, Didi Asmara Salim, Dr. Salvinder Singh Karam Singh. Protocol & Opening Ceremony: Mohd Rizan Abdul, Yeoh Poh See. Souvenir: Sharifah Zainhuda Syed Tajul Ariffin. Registration: Muhammad Zaki Zainal, Adi Firdaus Hat, Nor Ashimy Mohd Noor, Mohd Naim Awang. Proofread: Shamsul Banu Mohamed Siddik, Fairuz Liza Shuhaimi. Logistics: Mohd Zulhairi Zulkipli, Ahmad Fithri Hasyimie Hashim. Multimedia: Muhammad Redzuan Che Noordin, Mohd Redzuwan Danuri, Ahmad Syawal Yeop Aziz. Liason: Roseazah Ramli, Amrul Zani Mahadi. Sponsorship: Zuraini Gani, Hazril Hisham Hussin.
Advancement in Materials Processing Technology: Select Proceedings of AMPT 2020 (Springer Proceedings in Materials #12)
by Ranjeet Prasad Rina Sahu K. L. Sahoo G. N. JadhavThis book presents select proceedings of the National Conference on Advancement in Materials Processing Technology (AMPT 2020). It covers the new trends in materials and mineral processing technologies along with an emphasis on engineering materials, composite materials, smart materials and nanomaterials. Topics covered include advanced, mineral processing, advanced processing, foundry technology, modelling and simulation, recycling and waste recovery. Given the contents, this book will be useful for researchers, engineers and professionals working in the areas of chemical, mining, metallurgical and mechanical engineering and associated fields.
Advancement in Materials, Manufacturing and Energy Engineering, Vol. I: Select Proceedings of ICAMME 2021 (Lecture Notes in Mechanical Engineering)
by Puneet Verma Olusegun D. Samuel Tikendra Nath Verma Gaurav DwivediThis book (Vol. I) presents select proceedings of the conference on “Advancement in Materials, Manufacturing, and Energy Engineering (ICAMME 2021).” It discusses the latest materials, manufacturing processes, evaluation of materials properties for the application in automotive, aerospace, marine, locomotive, and energy sectors. The topics covered include advanced metal forming, bending, welding and casting techniques, recycling and re-manufacturing of materials and components, materials processing, characterization and applications, materials, composites and polymer manufacturing, powder metallurgy and ceramic forming, numerical modeling and simulation, advanced machining processes, functionally graded materials, non-destructive examination, optimization techniques, engineering materials, heat treatment, material testing, MEMS integration, energy materials, bio-materials, metamaterials, metallography, nanomaterial, SMART materials, bioenergy, fuel cell, and superalloys. The book will be useful for students, researchers, and professionals interested in interdisciplinary topics in the areas of materials, manufacturing, and energy sectors.
Advancement in Materials, Manufacturing and Energy Engineering, Vol. II: Select Proceedings of ICAMME 2021 (Lecture Notes in Mechanical Engineering)
by Puneet Verma Olusegun D. Samuel Tikendra Nath Verma Gaurav DwivediThis book (Vol. II) presents select proceedings of the conference on “Advancement in Materials, Manufacturing, and Energy Engineering (ICAMME 2021).” It discusses the latest materials, manufacturing processes, evaluation of materials properties for the application in automotive, aerospace, marine, locomotive, and energy sectors. The topics covered include advanced metal forming, bending, welding and casting techniques, recycling and re-manufacturing of materials and components, materials processing, characterization and applications, materials, composites and polymer manufacturing, powder metallurgy and ceramic forming, numerical modeling and simulation, advanced machining processes, functionally graded materials, non-destructive examination, optimization techniques, engineering materials, heat treatment, material testing, MEMS integration, energy materials, bio-materials, metamaterials, metallography, nanomaterial, SMART materials, bioenergy, fuel cell, and superalloys. The book will be useful for students, researchers, and professionals interested in interdisciplinary topics in the areas of materials, manufacturing, and energy sectors.