- Table View
- List View
50 Years of Structure and Bonding – The Anniversary Volume: The Anniversary Volume (Structure and Bonding #172)
by D. Michael P. MingosChemical structure and bonding. The scope of the series spans the entire Periodic Table and addresses structure and bonding issues associated with all of the elements. It also focuses attention on new and developing areas of modern structural and theoretical chemistry such as nanostructures, molecular electronics, designed molecular solids, surfaces, metal clusters and supramolecular structures. Physical and spectroscopic techniques used to determine, examine and model structures fall within the purview of Structure and Bonding to the extent that the focus is on the scientific results obtained and not on specialist information concerning the techniques themselves. Issues associated with the development of bonding models and generalizations that illuminate the reactivity pathways and rates of chemical processes are also relevant. The individual volumes in the series are thematic. The goal of each volume is to give the reader, whether at a university or in industry, a comprehensive overview of an area where new insights are emerging that are of interest to a larger scientific audience. Thus each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years should be presented using selected examples to illustrate the principles discussed. A description of the physical basis of the experimental techniques that have been used to provide the primary data may also be appropriate, if it has not been covered in detail elsewhere. The coverage need not be exhaustive in data, but should rather be conceptual, concentrating on the new principles being developed that will allow the reader, who is not a specialist in the area covered, to understand the data presented. Discussion of possible future research directions in the area is welcomed. Review articles for the individual volumes are invited by the volume editors.
50 Years World Heritage Convention: Shared Responsibility – Conflict & Reconciliation (Heritage Studies)
by Marie-Theres Albert Roland Bernecker Claire Cave Anca Claudia Prodan Matthias RippThis open access book identifies various forms of heritage destruction and analyses their causes. It proposes strategies for avoiding and solving conflicts, based on integrating heritage into the 2030 Agenda for Sustainable Development. It reflects on the identity-building role of heritage, on multidimensional conflicts and the destruction of heritage, and considers conflict-solving strategies and future perspectives. Furthermore, it engages theoretically and practically with the concepts of responsibility, reconciliation and sustainability, relating mainly to four Sustainable Development Goals, i.e. SDGs 4 (education), 11 (e.g. World Heritage), 13 (climate action) and 17 (partnerships for the goals). More than 160 countries have inscribed properties on the UNESCO World Heritage list since the World Heritage Convention came into force. Improvements in the implementation of the Convention, such as the Global Strategy for a Representative, Balanced and Credible World Heritage List, have occurred, but other conflicts have not been solved. The book advocates for a balanced distribution of properties and more effective strategies to represent the global diversity of cultural and natural heritage. Furthermore it highlights the importance of heritage in identity building.
507 Mechanical Movements: Mechanisms and Devices
by Henry T. BrownEpicyclic trains, oblique rollers, trip hammers, and lazy-tongs are among the ingenious mechanisms defined and illustrated in this intriguing collection. Spanning the first century of the Industrial Revolution, this 1868 compilation features simplified, concise illustrations of the mechanisms used in hydraulics, steam engines, pneumatics, presses, horologes, and scores of other machines.The movements of each of the 507 mechanisms are depicted in drawings on the left-hand page, and the facing page presents a brief description of the item's use and operation. Ranging from simple to intricately complex, the mechanisms offer a fascinating view of the variety of small components that constitute complex machinery. A detailed index provides easy reference to specific mechanisms.Inventors, tinkerers, and anyone with an interest in the history of invention and technology will find this volume a treasury of information and inspiration.
50th Anniversary of Electron Counting Paradigms for Polyhedral Molecules: Bonding in Clusters, Intermetallics and Intermetalloids (Structure and Bonding #188)
by D. Michael P. MingosThe 50 Year Anniversary of the development of electron counting paradigms is celebrated in two volumes of Structure and Bonding. Volume 2 covers applications to metal and metalloid clusters of the transition and post-transition elements
50th Anniversary of Electron Counting Paradigms for Polyhedral Molecules: Historical and Recent Developments (Structure and Bonding #187)
by D. Michael P. MingosThe 50 Year Anniversary of the development of electron counting paradigms for polyhedral molecules is celebrated in two volumes of Structure and Bonding. Volume 1 covers the historical development, theoretical models and applications to boranes and metalloboranes.
52 Random Weekend Projects: For Budding Inventors and Backyard Builders
by The King of RandomFrom one of the most popular project channels on YouTube comes a how-to book on building things that go boom. Grant Thompson, "The King of Random," has created one of the most popular project channels on YouTube, featuring awesome videos such as How to Make a Laser Assisted Blowgun and Assassin’s Micro Crossbow. He currently has almost 10 million subscribers, posts 5 times a week, and averages over 40 million views a month.Partnering with Grant is Ted Slampyak, the artist behind the #1 New York Times bestseller 100 Deadly Skills.52 Random Weekend Projects: For Budding Inventors and Backyard Builders is a guide that enables ordinary folks to build an impressive arsenal of projects. These crafts combine some of Grant’s most popular projects—Matchbox Rockets, Pocket Slingshot Super Shooters, Proto-Putty, Ninja Balls, Mini Matchstick Guns, The Clothespin Pocket Pistol—with many new ones, providing clear instructions on how to build them step-by-step.Broken down into Beginner, Intermediate, and Advanced sections, 52 Random Weekend Projects is loaded with truly amazing projects, including:- Mousetrap Handgun- Mini Solar Scorcher- Air Vortex Canon- Air Mounted Skewer Shooter- Paracord Bullwhip- Bottle Cap Party Whistle- Ninja Stress Balls- Tablecloth Parachute- Skyblaster SlingshotAnd many more!
550 AP Biology Practice Questions
by Princeton ReviewTHE PRINCETON REVIEW GETS RESULTS. Get extra preparation for an excellent AP Biology score with 550 extra practice questions and answers. This eBook edition has been formatted for on-screen viewing with cross-linked questions, answers, and explanations. Practice makes perfect--and The Princeton Review's 550 AP Biology Practice Questions gives you everything you need to work your way to the top. Inside, you'll find tips and strategies for tackling and overcoming challenging questions, plus all the practice you need to get the score you want. Practice Your Way to Perfection.* 2 full-length practice tests and 16 practice drills covering each subject type* Practice drills organized by the 4 "Big Ideas"Academic and Strategic Explanations.* Detailed walk-throughs of free-response questions to help you write a winning essay* Answer keys and detailed explanations for each drill and test question Techniques That Actually Work.* Tried-and-true strategies to avoid traps and beat the test* Essential tactics to help you work smarter, not harder
The 5G Era: What is 5G and How Will it Change the World?
by Ligang XiangThis book states that the seventh information revolution is the intelligent Internet, and 5G is the foundation of the seventh information revolution. This book gives a clear introduction to the three major scenarios, six characteristics, core technologies, and global landscape of 5G, and answers "What is true 5G?" This book also gives an in-depth explanation of 5G-enabled traditional industries, and outlines the profound changes that 5G will bring to transportation, medical, industry, and agriculture. Finally, the author made bold assumptions about the opportunities and challenges that human society faces in the post-5G era. For readers who want to fully understand 5G, this book provides an important reference and is a must-have book.
5G Impact on Biomedical Engineering: Wireless Technologies Applications (Prospects in Biomedical Engineering and Applications)
by Abdallah Makhoul Jacques Demerjian Jacques Bou AbdoConsidering the importance of wireless networks in healthcare, this book is dedicated to studying the innovations and advancements of wireless networks for biomedical application and their impact. This book focuses on a wide range of wireless technologies related to healthcare and biomedical applications which include, among others, body sensor networks, mobile networks, internet of things, mobile cloud computing, pervasive computing and wearable computing. First the authors explain how biomedical applications using wireless technologies are built across networks. The authors also detail 5G spectrum splicing for medical applicatons. They then discuss how wearable computing can be used as activity recognition tools for biomedical applications through remote health monitoring and and remote health risk assessment. Finally the authors provide detailed discussions on security and privacy in wirelessly transmitted medical senor data. This book targets research-oriented and professional readers. It would fit as a recommended supplemental reading for graduate students. It also helps researchers enter the field of wireless biomedical applications.
5G Networks: An Overview of Architecture, Design, Use Cases and Deployment
by Atahar Khan Satya Priyo Dhar Ramakrishnan Shanmugasundaram Joe ChemparathyThis book provides comprehensive coverage of building an end-to-end view on how to architect, design, and orchestrate a 5G capable network that will integrate with 5G RAN, IP transport, datacenters, Telco Cloud, and 5G packet networks. It contains real-world examples with challenges and success strategies for deploying 5G Transport with closed-loop automation. It also focuses on aspects like scale, performance, latency, security, and manageability while building 5G transport for some of the world's largest 5G networks as well as migration approaches from 4G to 5G transport and core network.5G is an emerging technology that mobile service providers (MNO/MVNO) across the world are embracing. They are willing to invest in enabling their infrastructure for 5G and explore new business opportunities with their enterprise/mobile customers. As per the Gartner survey, the majority of communication service provider (CSP) revenue will come from 5G.5G is going to open the door to new applications such as wireless virtual reality, low latency machine-to-machine communication, smart city infrastructure, autonomous vehicles, IoT deployment, artificial intelligence-based applications, industrial automation and so much more.
5th International Conference on Nanotechnologies and Biomedical Engineering: Proceedings of ICNBME-2021, November 3-5, 2021, Chisinau, Moldova (IFMBE Proceedings #87)
by Ion Tiginyanu Victor Sontea Serghei RaileanThis book gathers the proceedings of the 5th International Conference on Nanotechnologies and Biomedical Engineering, held online on November 3–5, 2021, from Chisinau, Republic of Moldova. It covers fundamental and applied research at the interface between nanotechnologies and biomedical engineering. Chapters report on cutting-edge bio-micro/nanotechnologies, devices for biomedical applications, and advances in bio-imaging and biomedical signal processing, innovative nano-biomaterials as well as advances in e-health, medical robotics, and related topics. With a good balance of theory and practice, the book offers a timely snapshot of multidisciplinary research at the interface between physics, chemistry, biomedicine, materials science, and engineering.
5th International Symposium of Space Optical Instruments and Applications: Beijing, China, September 5–7, 2018 (Springer Proceedings in Physics #232)
by H. Paul Urbach Qifeng YuThis book gathers selected and expanded contributions presented at the 5th Symposium on Space Optical Instruments and Applications, which was held in Beijing, China, on September 5–7, 2018. This conference series is organized by the Sino-Holland Space Optical Instruments Laboratory, a cooperative platform between China and the Netherlands. The symposium focused on key technological problems regarding optical instruments and their applications in a space context. It covered the latest developments, experiments and results on the theory, instrumentation and applications of space optics. The book is split into five main sections: The first covers optical remote sensing system design, the second focuses on advanced optical system design, and the third addresses remote sensor calibration and measurement. Remote sensing data processing and information extraction are then presented, followed by a final section on remote sensing data applications.
60 Days to a Greener Life: Ease Eco-anxiety Through Joyful Daily Action
by Heather WhiteAre you worried about the climate crisis? Are you suffering from eco-anxiety? Do you want to help but you're not sure how? Do you want to learn how to make greener choices? If you answered yes to any of those questions, author and environmentalist Heather White's 60 Days to a Greener Life is the resource you need. You can read an entry every day or at your own pace. Each entry provides valuable insights and easy-to-apply ways you can live a more eco-friendly, joyful life. Each entry includes:a topic or question related to our world.an easy-to-understand explanation of ways you can adjust your lifestyle.an energizing prompt that gives you simple ideas on how to apply what you've learned.60 Days to a Greener Life will teach you about:eco-anxiety, how to manage it, and why individual action matters.climate change, recycling, and greener, sustainable school lunch choices. connecting to nature and wildlife.volunteering and how to jumpstart conversations about good environmental practices.renewable energy, regenerative agriculture, organic food, and GMOs.toxic chemicals, plastic pollution, safe drinking water, and more.Heather White is the founder of OneGreenThing.org. She directed environmental education advocacy at the nation's largest conservation organization, served as executive director to an environmental heath watchdog in Washington, DC, and led the nonprofit partner to Yellowstone National Park. She's been featured on Good Morning America, CBS, PBS, ABC, and quoted in the New York Times, the Washington Post, and Teen Vogue.
60-GHz CMOS Phase-Locked Loops
by Reza Mahmoudi Arthur H.M. Roermund Hammad M. CheemaThe promising high data rate wireless applications at millimeter wave frequencies in general and 60 GHz in particular have gained much attention in recent years. However, challenges related to circuit, layout and measurements during mm-wave CMOS IC design have to be overcome before they can become viable for mass market. 60-GHz CMOS Phase-Locked Loops focusing on phase-locked loops for 60 GHz wireless transceivers elaborates these challenges and proposes solutions for them. The system level design to circuit level implementation of the complete PLL, along with separate implementations of individual components such as voltage controlled oscillators, injection locked frequency dividers and their combinations, are included. Furthermore, to satisfy a number of transceiver topologies simultaneously, flexibility is introduced in the PLL architecture by using new dual-mode ILFDs and switchable VCOs, while reusing the low frequency components at the same time.
60 Years of Survival Outcomes at The University of Texas MD Anderson Cancer Center
by M. Alma Rodriguez Thomas W. Burke Ronald S. WaltersThis unique book provides a retrospective analysis of the changes in survival outcomes at the University of Texas, M.D. Anderson Cancer Center over the past six decades. Since opening its doors in 1944, M.D. Anderson has kept a continuous, uninterrupted data repository of the treatment and outcomes of each of its patients. It is this visionary database from the center's tumor registry which makes this groundbreaking book possible. Tracking results across time, this book shows radical shifts in outcomes trends, where great progress has been made, and where there is still a long way to go, and offers a snapshot into the parallel history of developments in care. Such data is crucial to informing how patients are counseled, how treatment decisions are determined, and how prognoses are made. 60 Years of Survival Outcomes at the University of Texas, M.D. Anderson Cancer Center is the only book to concurrently present longitudinal data on survival outcomes across the spectrum of rare and common cancers. Each chapter deals with a specific disease site, discussing current management approaches and presenting key data replete with illustrative charts, graphs, and tables. With the resources available only to the practitioners at this inimitable institution, this book heralds a cornerstone moment in the study of survival outcomes and the depth of our knowledge of cancer care.
64 Geeks: The Brains Who Shaped Our World
by Chas Newkey-BurdenWe wouldn't have Bluetooth or Wi-Fi today without the ingenuity of an actress once described as "the most beautiful woman in the world."And we might have had mobile messaging as early as 1901, were it not for the fickleness of a banker. From celebrated prodigies and self-proclaimed geniuses to history's hidden heroes-64 GEEKS brings you the incredible stories of the world's best brains, all presented alongside clever 8-bit likenesses.
6G: The Road To Future Wireless Technologies 2030 (River Publishers Series In Communications Ser.)
by Paulo Sergio Henrique Ramjee PrasadSince the launch of Second-Generation Networks (2G), planning for each future mobile service was initiated many years before its commercial launch. In 2019, 5G Networks begun to be deployed commercially after almost ten years of planning. Similarly, the race for the 6G wireless networks that will be operational in 2030 has already started. To fulfill its potential in the upcoming decade, 6G will undoubtedly require an architectural orchestration based on the amalgamation of existing solutions and innovative technologies. The book will begin by evaluating the state of the art of all current mobile generations' while looking into their core building blocks. 6G implementation will require fundamental support from Artificial Intelligence (AI) and Machine Learning on the network's edge and core, including a new Radio Frequency (RF) spectrum. The 6G use cases will require advanced techniques for enabling the future wireless network to be human-centric, ensuring enhanced quality of experience (QoE) for most of its applications. The concept of Human Bond Communication Beyond 2050 (Knowledge Home) and Communication, Navigation, Sensing, and Services (CONASENSE) will also profit from future wireless communication. Terahertz domains will exploit the ultra-Massive Multiple Input Multiple Output Antennas (UM-MIMO) technologies to support Terabits' data throughputs.Moreover, optical wireless communications (OWC) will also come into play to support indoor and outdoor high-data rates. Further expansion of 6G core entities will support the novel concept of Society 5.0. Quantum computing processing and communications is also likely to be added into the 6G ecosystem with security managed by blockchain orchestration for a robust network.
6G Connectivity-Systems, Technologies, and Applications: Digitalization of New Technologies, 6G and Evolutio (River Publishers Series in Communications and Networking)
by Ramjee Prasad Sunil Kumar Pandey Dnyaneshwar Shriranglal Mantri Albena Dimitrova MihovskaThis book covers need for 6G connectivity arising from the pursuit of higher data speeds, ultra-low latency, massive IoT connectivity, enhanced spectral efficiency, and the facilitation of new and transformative applications. By addressing these drivers and expectations, 6G aims to revolutionize wireless communication, opening up a realm of possibilities for industries, societies, and individuals.Technological improvements and evolutions are required beyond fifth-generation (5G) networks for wireless communications as well as in the industry where the involvement of collaborative robots (COBOT) will satisfy the personal needs of human beings as and when required leading to human–machine interactions. A considerable amount of effort has been devoted, both in industry and academia, towards the performance modelling, evaluation and prediction of convergent multi-service heterogeneous, future-generation networks such as 6G.Technical topics discussed in the book include: Network security and attacks 6G applications and Industry 5.0 Human centric interface Green computing in wireless cellular networks Next generation networks (IOT, Cloud Computing, Big Data, etc.)
6th International Conference on Adhesive Bonding 2021: Selected Contributions of AB 2021 (Proceedings in Engineering Mechanics)
by Lucas F. M. da Silva Robert D. AdamsThis book focusses on structural bonding, including many facets, like fundamental aspects of adhesion, science and technology of surfaces, adhesive materials, mechanical properties of bonded joints, innovative designs and applications, testing and standardization, industrial aspects, quality procedures, environmental and ecological aspects. This first volume of the new series gathers selected contributions of the 6th international conference on structural adhesive bonding AB 2021, held in Porto, Portugal, 8-9 July 2021, represents the latest trends and serves as a reference volume for researchers and graduate students working in this field.
6th International Conference on Advancements of Medicine and Health Care through Technology; 17–20 October 2018, Cluj-Napoca, Romania: MEDITECH 2018 (IFMBE Proceedings #71)
by Simona Vlad Nicolae Marius RomanThis volume presents the contributions of the 6th International Conference on Advancements of Medicine and Health Care through Technology – MediTech 2018, held between 17 – 20 October 2018 in Cluj-Napoca, Romania. The papers of this Proceedings volume present new developments in :- Health Care Technology- Medical Devices, Measurement and Instrumentation- Medical Imaging, Image and Signal Processing- Modeling and Simulation- Molecular Bioengineering- Biomechanics
6th International Conference on Nanotechnologies and Biomedical Engineering: Proceedings of ICNBME-2023, September 20–23, 2023, Chisinau, Moldova - Volume 2: Biomedical Engineering and New Technologies for Diagnosis, Treatment, and Rehabilitation (IFMBE Proceedings #92)
by Victor Sontea Ion Tiginyanu Serghei RaileanThis book reports on advances in fundamental and applied research at the interface between nanotechnology and biomedical engineering. Gathering peer-reviewed contributions to the 6th International Conference on Nanotechnologies and Biomedical Engineering, ICNBME held on September 20-23, 2023, in Chisinau, Republic of Moldova, this second volume of the proceedings focuses on clinical engineering and instrumentation, bioinformatics, image and signal processing techniques, and new technologies for medical diagnosis, treatment and personalised medicine. With a good balance of theory and practice, the book offers a timely snapshot of multidisciplinary research at the interface between physics, chemistry, biomedicine, materials science, and engineering.
6th International Conference on Nanotechnologies and Biomedical Engineering: Proceedings of ICNBME-2023, September 20–23, 2023, Chisinau, Moldova - Volume 1: Nanotechnologies and Nano-biomaterials for Applications in Medicine (IFMBE Proceedings #91)
by Victor Sontea Ion Tiginyanu Serghei RaileanThis book reports on advances in fundamental and applied research at the interface between nanotechnology and biomedical engineering. Gathering peer-reviewed contributions to the 6th International Conference on Nanotechnologies and Biomedical Engineering, ICNBME held on September 20-23, 2023, in Chisinau, Republic of Moldova, this first volume of the proceedings focuses on nanotechnologies and nano-biomaterials, and their applications in medicine. With a good balance of theory and practice, the book offers a timely snapshot of multidisciplinary research at the interface between physics, chemistry, biomedicine, materials science, and engineering.
6th International Symposium of Space Optical Instruments and Applications: Delft, the Netherlands, September 24–25, 2019 (Space Technology Proceedings #7)
by H. Paul Urbach Qifeng YuThis proceedings volume contains selected and expanded contributions presented at the 6th International Symposium of Space Optical Instruments and Applications, held in Delft, the Netherlands on Sep 24th–25th, 2019. The meeting was organized by the Sino-Holland Space Optical Instruments Joint Laboratory and supported by TU Delft.The symposium focused on key innovations of space-based optical instruments and applications, and the newest developments in theory, technology and applications in optics, in both China and Europe. It thus provided a platform for exchanges on the latest research and current and planned optical missions.The major topics covered in these conference proceedings are: space optical remote sensing system design; advanced optical system design and manufacturing; remote sensor calibration and measurement; remote sensing data processing and information retrieval; and remote sensing data applications.
The 6th International Symposium on Water Resource and Environmental Management: Water-Energy-Environment-Governance from Interdisciplinary Perspectives (Environmental Science and Engineering)
by Haoqing XuThis book is designed to be the introductory work in the Water-Energy-Environment-Governance from Interdisciplinary Perspectives Series and provides an in-depth look at sustainable development and management in the water sector across. The water-energy-environment nexus (WEEN) represents important interstate connections of water, energy, and the environment. Present day water and energy systems are interdependent. Water is used in all phases of energy production and electricity generation. Energy is required to extract, convey, and deliver water of appropriate quality for diverse human uses and then again to treat waste waters prior to their return to the environment. Security in water, energy, and the environment is associated with human, economic, and environmental sustainability. This interweaving is strengthening under aggregating natural resource scarcity and climate change. This book includes selected papers from the 6th International Symposium on Water Resource and EnvironmentalManagement (WREM 2023) and consists of themes pertaining to water resource and environmental management. It provides readers with comprehensive information, and formulation of solutions leading to a set of Water-Energy-Environment-Governance from Interdisciplinary Perspectives through our forum and the publication of your research. As a reference, it is of interest to students, scientists, engineers, government officials, and water resource managers.
6th Kuala Lumpur International Conference on Biomedical Engineering 2021: Proceedings of BioMed2021, July 28-29, 2021 (IFMBE Proceedings #86)
by Juliana Usman Yih Miin Liew Mohd Yazed Ahmad Fatimah IbrahimThis book presents cutting-edge research and developments in the field of biomedical engineering, with a special emphasis on achievements by Asian research groups. It covers machine learning and computational modeling methods applied to biomedical and clinical research, advanced methods for biosignal processing and bioimaging, MEMS applications, and advances in biosensors. Further topics include biomechanics, prosthetics, orthotics and tissue engineering. Other related (bio-) engineering applications, such as in ecosystem development, water quality assessment, and material research, are also covered. Gathering the proceedings of the 6th Kuala Lumpur International Conference on Biomedical Engineering, held online on July 28-29, 2021 from Kuala Lumpur, Malaysia, the book is intended to provide researchers and professionals with extensive and timely information on the state-of-the-art research and applications in biomedical engineering, and to promote interdisciplinary and international collaborations.