- Table View
- List View
Advances in Design, Simulation and Manufacturing III: Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 2: Mechanical and Chemical Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Ivan Pavlenko Oleksandr Liaposhchenko José Machado Milan EdlThis book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.
Advances in Design, Simulation and Manufacturing III: Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Justyna Trojanowska Jozef Zajac Ivan Pavlenko Dragan PerakovićThis book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.
Advances in Design, Simulation and Manufacturing IV: Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 1: Manufacturing and Materials Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Justyna Trojanowska Ivan Pavlenko Jozef Zajac Dragan PerakovićThis book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
Advances in Design, Simulation and Manufacturing IV: Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 2: Mechanical and Chemical Engineering (Lecture Notes in Mechanical Engineering)
by José Machado Vitalii Ivanov Oleksandr Liaposhchenko Ivan Pavlenko Milan EdlThis book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
Advances in Design, Simulation and Manufacturing V: Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7–10, 2022, Poznan, Poland – Volume 1: Manufacturing and Materials Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Justyna Trojanowska Ivan Pavlenko Erwin Rauch Dragan PerakovićThis book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Advances in Design, Simulation and Manufacturing V: Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7–10, 2022, Poznan, Poland – Volume 2: Mechanical and Chemical Engineering (Lecture Notes in Mechanical Engineering)
by José Machado Vitalii Ivanov Oleksandr Liaposhchenko Ivan Pavlenko Milan EdlThis book reports on topics at the interface between mechanical and chemical engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and energy-efficient technologies, describing applications in the food and energy production sector. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Advances in Design, Simulation and Manufacturing VI: Proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6–9, 2023, High Tatras, Slovak Republic – Volume 2: Mechanical and Materials Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Ivan Pavlenko Oleksandr Liaposhchenko José Machado Milan EdlThis book reports on topics at the interface between mechanical and materials engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers advanced methods in design engineering, applied to mechatronic systems, industrial equipment, turbines and drives. It reports on methods for improving the separation and prilling processes. It covers cutting-edge theoretical and experimental findings relating to material behavior, and materials, composites and coatings design. Further, it reports on advanced material treatments such as chemical-thermocycling, plasma deposition, and mechanical strengthening processes, among others. Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2023), held on June 6–9, 2023, in High Tatras, Slovak Republic, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Advances in Design, Simulation and Manufacturing VI: Proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6–9, 2023, High Tatras, Slovak Republic - Volume 1: Manufacturing Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Justyna Trojanowska Ivan Pavlenko Erwin Rauch Ján PiteľThis book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems. It covers sensors, machine vision systems, collaborative technologies, industrial robotics, digital twins, and virtual and mixed reality. Further topics include quality management, supply chain, agile manufacturing, lean management, and sustainable transportation. Chapters report on theoretical research and experimental studies concerning engineering design, simulation, and various machining processes for classical and additive manufacturing. They also discusses key aspects related to engineering education and competence management in the industry 4.0 era. Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 6-9, 2023, in High Tatras, Slovak Republic, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Advances in Design, Simulation and Manufacturing VII: Proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4–7, 2024, Pilsen, Czech Republic - Volume 2: Mechanical and Materials Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Ivan Pavlenko Milan Edl Jose Machado Jinyang XuThis book reports on topics at the interface between mechanical and materials engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers advanced methods in design and process engineering applied to mechatronic systems, industrial equipment, turbines, and drives. It covers cutting-edge theoretical and experimental findings relating to material behavior, composites, nanomaterials, and coatings design. Based on the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2024), held on June 4–7, 2024, in Pilsen, Czech Republic, this second volume of a 2-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.
Advances in Design, Simulation and Manufacturing VII: Proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4–7, 2024, Pilsen, Czech Republic - Volume 1: Manufacturing Engineering (Lecture Notes in Mechanical Engineering)
by Vitalii Ivanov Justyna Trojanowska Ivan Pavlenko Erwin Rauch Ján PiteľThis book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems. It covers sensors, machine vision systems, collaborative technologies, industrial robotics, digital twins, and virtual and mixed reality. Further topics include quality management, supply chain, agile manufacturing, lean management, and sustainable transportation. Chapters report on theoretical research and experimental studies concerning engineering design, simulation, and various machining processes for subtractive and additive manufacturing. It also discusses key aspects related to engineering education and competence management in the Industry 4.0 era. Based on the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2024), held on June 4-7, 2024, in Pilsen, Czech Republic, this first volume of a 2-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.
Advances in Diagnosis and Management of Phytonematodes
by P. Parvatha ReddyAdvances in Diagnosis and Management of Phytonematodes provides information on various aspects of diagnosis and eco-friendly nematode management. It explains at length nematode diagnosis—morphological, biochemical and molecular—and management strategies—regulatory, physical, cultural, chemical, biological, host resistance and integrated management methods. This book will be of immense value to the scientific community involved in teaching, research and extension activities related to the diagnosis and management of phytonematodes. It is suitable for teaching both undergraduate and postgraduate courses in the field of plant protection. It can also serve as an advantageous reference to policymakers and practicing farmers. Print edition not for sale in India.
Advances in Diagnostics of Processes and Systems: Selected Papers from the 14th International Conference on Diagnostics of Processes and Systems (DPS), September 21–23, 2020, Zielona Góra (Poland) (Studies in Systems, Decision and Control #313)
by Józef Korbicz Krzysztof Patan Marcel LuzarThis book contains a collection of 13 carefully selected papers contributed by researches in technical and partial medical diagnostics as well as fault-tolerant control and constitutes a comprehensive study of the field. Nowadays technical diagnostics and fault-tolerant control are a field of intensive scientific research that covers well-established topics along with emerging developments in control engineering, artificial intelligence, applied mathematics and statistics. At the same time, a growing number of applications of different fault diagnosis methods, especially in the electrical, mechanical, chemical and medical areas, are being observed. The aim of the book is to show the bridge between technical and medical diagnosis based on analytical and artificial intelligence methods and techniques. The book is divided into three parts: I. Fault-Tolerant Control and Reconfiguration, II. Fault Diagnosis of Processes and Systems, III. Medical Applications. The book is of interest to scientists, engineers and academics dealing with the problems of designing technical diagnosis and fault-tolerant control systems. Its target readers are also junior researchers and students of control, artificial intelligence and computer engineering.
Advances in Dielectric Elastomer Composites: A Nonlinear Elasticity Framework
by Masoud Asgari Marzie MajidiThis is a comprehensive guide to dielectric elastomer composites (DECs), which play an integral role in new electromechanically active smart-material technologies.Introducing the basic concepts behind DECs, the book is accessible to readers at all levels. It demonstrates how to implement practical problem-solving methods through nonlinear continuum mechanics and also discusses fiber-reinforced anisotropic DE composites and the electromechanically coupled behavior of anisotropic fiber-reinforced DEs. Using practical examples throughout, it proposes models which utilize the strain energy function, nonlinear electro-elasticity, and nonlinear continuum mechanics. It presents clear guidelines for creating practical nonlinear finite element code, and introduces the reader to hyperelasticity. The book will be an accessible reference guide for students, researchers, and engineers in the field of mechanical engineering, bioengineering, materials science, aeronautics, and robotics.
Advances in Digital Health and Medical Bioengineering: Proceedings of the 11th International Conference on E-Health and Bioengineering, EHB-2023, November 9–10, 2023, Bucharest, Romania – Volume 1: Medical Devices, Measurements, and Artificial Intelligence Applications (IFMBE Proceedings #109)
by Hariton-Nicolae Costin Ratko Magjarević Gladiola Gabriela PetroiuThis book gathers the proceedings of the 11th International Conference on E-Health and Bioengineering, EHB 2023, held in hybrid form on November 9–10, 2023, in/from Bucharest, Romania. This first volume of a three-volume set reports on advances in medical devices and instrumentation, for a wide range of applications including medical diagnosis and therapy, rehabilitation, and medical data management. It also describes the use of artificial intelligence in medicine for detecting and modeling diseases, health monitoring, medical decision making, and related applications. All in all, this book offers extensive and timely information to researchers and professionals in bioengineering, health informatics and related interdisciplinary fields.
Advances in Digital Health and Medical Bioengineering: Proceedings of the 11th International Conference on E-Health and Bioengineering, EHB-2023, November 9–10, 2023, Bucharest, Romania – Volume 3: Telemedicine, Biomaterials, Environmental Protection, Medical Imaging, and Biomechanics (IFMBE Proceedings #111)
by Hariton-Nicolae Costin Ratko Magjarević Gladiola Gabriela PetroiuThis book gathers the proceedings of the 11th International Conference on E-Health and Bioengineering, EHB 2023, held in hybrid form on November 9–10, 2023, in/from Bucharest, Romania. This third volume of a 3-volume set reports on systems, sensors and solutions for providing e-health, artificial intelligence and IoT applications in medicine, new biomaterials and nanoparticles, including solutions for their sustainable, green, and safe use and production, and advances in biomedical imaging and signal processing. All in all, this book provides a large audience of researchers and professionals with extensive and timely information on the state of the art in e-health, bioengineering, and other related fields.
Advances in Digital Health and Medical Bioengineering: Proceedings of the 11th International Conference on E-Health and Bioengineering, EHB-2023, November 9–10, 2023, Bucharest, Romania – Volume 2: Health Technology Assessment, Biomedical Signal Processing, Medicine and Informatics (IFMBE Proceedings #110)
by Hariton-Nicolae Costin Ratko Magjarević Gladiola Gabriela PetroiuThis book gathers the proceedings of the 11th International Conference on E-Health and Bioengineering, EHB2023, held in hybrid form on November 9–10, 2023, in/from Bucharest, Romania. This second volume of a 3-volume set reports on methods for and results from health technology assessment processes, on advances in biosignal processing, medical imaging, informatics and big data in medicine, and current knowledge concerning the design and evaluation of medical devices. It addresses a broad audience of researchers and professionals working at the interface between medicine, informatics, bioengineering, and electrical and mechanical engineering.
Advances in Digital Human Modeling: Proceedings of the 8th International Digital Human Modeling Symposium, 4-6 September 2023, Antwerp, Belgium (Lecture Notes in Networks and Systems #744)
by Sofia Scataglini Gregor Harih Wim Saeys Steven TruijenThis book reports on advances in human modeling techniques, covering cutting-edge algorithms and their practical implementation in health and medicine, automotive, clothing, virtual reality simulations, robotics, and assistive technologies. Gathering the proceedings of the 8th International Digital Human Modeling Symposium, held on September 4-6, 2023, in Antwerp, Belgium, it offers a timely snapshot on interdisciplinary, applied research, at the interface between computer science, ergonomics, engineering, design, health and technologies.
Advances in Digital Logistics, Logistics and Sustainability: Selected Contributions to the 5th Central European Conference on Logistics 2024, CECOL 2024 (Lecture Notes in Logistics)
by Péter Tamás Tamás Bányai Péter Telek Ákos CservenákThis book offers a timely snapshot of cutting-edge research and practice in the field of logistics. It covers a range of cutting-edge topics relating to sustainability, digitalization and education, together with traditional ones, such as optimization of supply chain, production processes, storage and material handling. Gathering the best papers presented at the 5th Central European Conference on Logistics 2024, CECOL 2024, held on April 22–24, in Miskolc, Hungary, this book reports challenges in logistics, together with updated methods and strategies to solve classical and future logistics problems in the context of industry 4.0
Advances in Digital Manufacturing Systems: Technologies, Business Models, and Adoption
by R. P. Sundarraj Svetan Ratchev Kulwant S. Pawar R. K. AmitThis book contains contemporary discussions on technology, business models, and the adoption of digital manufacturing systems. The book's initial chapters cover technological details underpinning the digital manufacturing systems, for example, cyber-physical systems and digital twins. Next, the book discusses how organizations modify their business models using concepts such as servitization and platforms to leverage digital manufacturing. The latter chapters focus on how a country's unique economic and infrastructural context influences digital manufacturing adoption in terms of technology and business models and frameworks to evaluate readiness for digital manufacturing. With perspectives from different continents, the book appeals to academic researchers and industry alike.
Advances in Digital Science: ICADS 2021 (Advances in Intelligent Systems and Computing #1352)
by Tatiana AntipovaThis book gathers selected papers that were submitted to the 2021 International Conference on Advances in Digital Science (ICADS 2021) that aims to make available the discussion and the publication of papers on all aspects of single and multi-disciplinary research on Conference topics (https://ics.events/icads-2021/). ICADS 2021 was held on February 19–21, 2021. An important characteristic feature of Conference is the short publication time and world-wide distribution. Written by respected researchers, the book covers a range of innovative topics related to: Advances in Digital Agriculture & Food Technology, Advances in Digital Economics, Advances in Digital Education, Advances in Public Health Care, Hospitals & Rehabilitation, Advances in Digital Social Media, Advances in Digital Technology & Applied Sciences, Advances in E-Information Systems, and Advances in Public Administration.This book is useful for private and professional non-commercial research and classroom use (e.g. sharing the contribution by mail or in hard copy form with research colleagues for their professional non-commercial research and classroom use); for use in presentations or handouts for any level students, researchers, etc.; for the further development of authors’ scientific career (e.g. by citing, and attaching contributions to job or grant application).
Advances in Direct Methods for Materials and Structures
by Alan Cocks Olga Barrera Alan PonterThis book offers a state-of-the-art overview and includes recent developments of various direct computational analysis methods. It is based on recently developed and widely employed numerical procedures for limit and shakedown analysis of structures and their extensions to a wide range of physical problems relevant to the design of materials and structural components. The book can be used as a complementary text for advanced academic courses on computational mechanics, structural mechanics, soil mechanics and computational plasticity and it can be used a research text.
Advances in Discontinuous Numerical Methods and Applications in Geomechanics and Geoengineering
by Jian Zhao Yuzo Ohnishi Gao-Feng Zhao Takeshi SasakiRocks and soils can behave as discontinuous materials, both physically and mechanically, and for such discontinuous nature and behaviour there remain challenges in numerical modelling methods and techniques. Some of the main discontinuum based numerical methods, for example the distinct element method (DEM) and the discontinuous deformation analysi
Advances in Distillation Retrofit
by Nguyen Van Duc Long Moonyong LeeThis book describes the current state of the art in the retrofit of existing distillation processes using advanced distillation techniques. Highlighting concept and practical application rather than theory, it emphasizes the use of advanced process integration and intensification techniques, such as multi-effect distillation, heat pump assisted distillation, thermally coupled distillation, dividing wall column, reactive distillation, and innovative hybrid systems. As a thermal separation method, distillation is one of the most important and widely used technologies in the chemical process industry. While it has many advantages, one major drawback is its large energy requirement, which can significantly influence overall plant profitability. The increasing cost of energy has forced industry to reduce its energy requirement, but simultaneously there has been a need to increase capacity and output due to heightened demand. To accomplish this, the retrofit of distillation processes to increase efficiency and output has become a crucial issue. This book describes the use of advanced process integration and process intensification techniques to carry out effective distillation retrofit. Written by leading researchers in distillation process, process integration, process intensification, and process retrofit, the book presents a comprehensive review of contemporary advanced distillation techniques which can be employed in grass-root systems and retrofit. It is a valuable source of information for undergraduate and postgraduate students of chemical engineering, practicing process designers and chemical engineers.
Advances in Distributed Computing and Machine Learning: Proceedings of ICADCML 2023 (Lecture Notes in Networks and Systems #660)
by Suchismita Chinara Asis Kumar Tripathy Kuan-Ching Li Jyoti Prakash Sahoo Alekha Kumar MishraThis book is a collection of peer-reviewed best selected research papers presented at the Fourth International Conference on Advances in Distributed Computing and Machine Learning (ICADCML 2023), organized by Department of Computer Science and Engineering, National Institute of Technology, Rourkela, Odisha, India, during 15–16 January 2023. This book presents recent innovations in the field of scalable distributed systems in addition to cutting edge research in the field of Internet of Things (IoT) and blockchain in distributed environments.
Advances in Distributed Computing and Machine Learning: Proceedings of ICADCML 2024, Volume 1 (Lecture Notes in Networks and Systems #955)
by Kuan-Ching Li Asis Kumar Tripathy Mahasweta Sarkar Jyoti Prakash Sahoo Umakanta NandaThis book is a collection of peer-reviewed best selected research papers presented at the Fifth International Conference on Advances in Distributed Computing and Machine Learning (ICADCML 2024), organized by the School of Electronics and Engineering, VIT - AP University, Amaravati, Andhra Pradesh, India, during January 5–6, 2024. This book presents recent innovations in the field of scalable distributed systems in addition to cutting-edge research in the field of Internet of Things (IoT) and blockchain in distributed environments.