- Table View
- List View
Guidelines for Design of Low-Rise Buildings Subjected to Lateral Forces
by Ajaya Kumar Gupta Peter James MossGuidelines for Design of Low-Rise Buildings Subjected to Lateral Forces is a concise guide that identifies performance issues, concerns, and research needs associated with low-rise buildings. The book begins with an introduction that discusses special problems with low-rise buildings subjected to wind and earthquakes. Chapter 2 examines probabilistic methods and their use in evaluating risks from natural hazards. It also addresses the characteristics of wind and seismic forces and levels of risk implied by building codes. Wind forces are covered in more detail in Chapter 3, with discussions of wind force concepts and wind-structure interactions. Chapter 4 is devoted to earthquake forces and traces the development of building codes for earthquake resistant design. Chapter 5 describes the main framing systems used to resist lateral forces and discusses the code requirements for drift control. The designs and requirements for connections between building elements are addressed in Chapter 6. It includes examples along with several illustrations of suitable connections. The performance of non-structural elements during wind and earthquake forces is also examined in detail. This book serves as an important reference for civil engineers, construction engineers, architects, and anyone concerned with structural codes and standards. It is an excellent guide that can be used to supplement design recommendations and provide a design basis where there are no current requirements.
Guidelines for Determining the Probability of Ignition of a Released Flammable Mass
by CcpsComplemented by an estimating tool spreadsheet based on a fixed set of chemicals to assist in risk estimations, Probability of Ignition of a Released Flammable Mass converts a "best guess" to a calculated value based on available information and current technology. The text documents and explains the science and background of the technology-based approach. The tool, when populated with appropriate data, yields an estimate of the probability that a defined release of a flammable material will ignite if exposed to an ignition source. This information can be used to make risk assessments with a higher degree of confidence than estimates made before and it provides valuable information for use in the development of a facility's Emergency Response Plan.
Guidelines for Developing Instructions
by Kay Inaba Stuart O. Parsons Robert J. SmillieConfusing, inadequate instructions for setting up and using consumer products are not only unhelpful, but potentially dangerous. They may contain wrong information, poor warnings, and no pictures or illustrations. Standards are either non-existent or little known, even though the U.S. government has developed and tested standards for the past thirt
Guidelines for Enabling Conditions and Conditional Modifiers in Layer of Protection Analysis
by CcpsThe initial Layer of protection analysis (LOPA) book published in 2001 set the rules and approaches for using LOPA as an intermediate method between purely qualitative hazards evaluation/analysis and more quantitative analysis methods. Basic LOPA provides an order-of-magnitude risk estimate of risk with fairly reproducible results. LOPA results are considered critical in determining safety integrity level for design of safety instrumented systems.This guideline clarifies key concepts and reinforces the limitations and the requirements of LOPA. The main scope of the guideline is to provide examples of CMs and ECs and to provide concrete guidance on the protocols that must be followed to use these concepts. The book presents a brief overview of Layer of Protection Analysis (LOPA) and its variations, and summarizes terminology used for evaluating scenarios in the context of a typical incident sequence. It defines and illustrates the most common types of ECs and CMs and shows how they interrelate to risk criteria as well as their application to other methods.
Guidelines for Engineering Design for Process Safety
by Center For Chemical Process SafetyThis updated version of one of the most popular and widely used CCPS books provides plant design engineers, facility operators, and safety professionals with key information on selected topics of interest. The book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage.Key areas to be enhanced in the new edition include inherently safer design, specifically concepts for design of inherently safer unit operations and Safety Instrumented Systems and Layer of Protection Analysis. This book also provides an extensive bibliography to related publications and topic-specific information, as well as key information on failure modes and potential design solutions.
Guidelines for Evaluating Process Plant Buildings for External Explosions, Fires, and Toxic Releases, 2nd Edition
by CcpsSiting of permanent and temporary buildings in process areas requires careful consideration of potential effects of explosions and fires arising from accidental release of flammable materials. This book, which updates the 1996 edition, provides a single-source reference that explains the American Petroleum Institute (API) permanent (752) and temporary (753) building recommended practices and details how to implement them. New coverage on toxicity and updated standards are also highlighted. Practical and easy-to-use, this reliable guide is a must-have for implementing safe building practices.
Guidelines for Failure Modes and Effects Analysis for Medical Devices
by Dyadem PressChallenged by stringent regulations, vigorous competition, and liability lawsuits, medical device manufactures must develop safe, reliable, and cost-effective products, and managing and reducing risk is a vital element of reaching that goal. A practical guide to achieving corporate consistency while dramatically cutting the time required for studies, Guidelines for Failure Modes and Effects Analysis for Medical Devices focuses on Failure Modes and Effects Analysis (FMEA) and its application throughout the life cycle of a medical device. It outlines the major U.S. and E.U. standards and regulations and provides a detailed yet easy-to-read overview of risk management and risk analysis methodologies, common FMEA pitfalls, and FMECA-Failure Mode, Effects, and Criticality Analysis.Discover how the FMEA methodology can help your company achieve a more cost-effective manufacturing process by improving the quality and reliability of your products. This new FMEA manual from the experts at Dyadem is the ultimate resource for you and your colleagues to learn more about Failure Modes and Effects Analysis and then teach others at your facility. This comprehensive manual is sure to become a standard reference for engineering professionals.
Guidelines for Green Mine Construction and Management
by Yong Wang Suping Peng Liang WangThis book comprehensively covers many aspects of green mine, including the basic situation of green mines, mine facilities, extraction management, ecological environment, scientific and technological innovation, standardized management, environmental protection inspectors, and special tools in response to the needs of green mine construction, assessment, and management. It is highly informative with valuable techniques and tools providing insights both for scholars and practitioners working in green mine field.
Guidelines for Hazard Evaluation Procedures
by Center For Chemical Process SafetyGuidelines for Hazard Evaluation Procedures, 3rd Edition keeps process engineers updated on the effective methodologies that process safety demands. Almost 200 pages of worked examples are included to facilitate understanding. References for further reading, along with charts and diagrams that reflect the latest views and information, make this a completely accessible work. The revised and updated edition includes information not included in previous editions giving a comprehensive overview of this topic area.
Guidelines For Human Embryonic Stem Cell Research
by National Research Council Institute of Medicine of the National AcademiesThe National Academies Press (NAP)--publisher for the National Academies--publishes more than 200 books a year offering the most authoritative views, definitive information, and groundbreaking recommendations on a wide range of topics in science, engineering, and health. Our books are unique in that they are authored by the nation's leading experts in every scientific field.
Guidelines for Implementing Process Safety Management
by CcpsThe 2nd edition provides an update of information since the publication of the first edition including best practices for managing process safety developed by industry as well as incorporate the additional process safety elements. In addition the book includes a focus on maintaining and improving a Process Safety Management (PSM) System. This 2nd edition also provides "how to information to" determine process safety performance status, implement one or more new elements into an existing PSM system, maintain or improve an existing PSM system, and manage future process safety performance.
Guidelines for Inherently Safer Chemical Processes: A Life Cycle Approach
by CcpsSince the publication of the second edition several United States jurisdictions have mandated consideration of inherently safer design for certain facilities. Notable examples are the inherently safer technology (IST) review requirement in the New Jersey Toxic Chemical Prevention Act (TCPA), and the Inherently Safer Systems Analysis (ISSA) required by the Contra Costa County (California) Industrial Safety Ordinance. More recently, similar requirements have been proposed at the U.S. Federal level in the pending EPA Risk Management Plan (RMP) revisions. Since the concept of inherently safer design applies globally, with its origins in the United Kingdom, the book will apply globally. The new edition builds on the same philosophy as the first two editions, but further clarifies the concept with recent research, practitioner observations, added examples and industry methods, and discussions of security and regulatory issues. Inherently Safer Chemical Processes presents a holistic approach to making the development, manufacture, and use of chemicals safer. The main goal of this book is to help guide the future state of chemical process evolution by illustrating and emphasizing the merits of integrating inherently safer design process-related research, development, and design into a comprehensive process that balances safety, capital, and environmental concerns throughout the life cycle of the process. It discusses strategies of how to: substitute more benign chemicals at the development stage, minimize risk in the transportation of chemicals, use safer processing methods at the manufacturing stage, and decommission a manufacturing plant so that what is left behind does not endanger the public or environment.
Guidelines for Initiating Events and Independent Protection Layers in Layer of Protection Analysis
by CcpsThe book is a guide for Layers of Protection Analysis (LOPA) practitioners. It explains the onion skin model and in particular, how it relates to the use of LOPA and the need for non-safety instrumented independent protection layers. It provides specific guidance on Independent Protection Layers (IPLs) that are not Safety Instrumented Systems (SIS). Using the LOPA methodology, companies typically take credit for risk reductions accomplished through non-SIS alternatives; i.e. administrative procedures, equipment design, etc. It addresses issues such as how to ensure the effectiveness and maintain reliability for administrative controls or "inherently safer, passive" concepts. This book will address how the fields of Human Reliability Analysis, Fault Tree Analysis, Inherent Safety, Audits and Assessments, Maintenance, and Emergency Response relate to LOPA and SIS. The book will separate IPL's into categories such as the following: Inherent Safety eliminates a scenario or fundamentally reduces a hazard Preventive/Proactive prevents initiating event from occurring such as enhanced maintenance Preventive/Active stops chain of events after initiating event occurs but before an incident has occurred such as high level in a tank shutting off the pump. Mitigation (active or passive) minimizes impact once an incident has occurred such as closing block valves once LEL is detected in the dike (active) or the dike preventing contamination of groundwater (passive).
Guidelines for Integrating Management Systems and Metrics to Improve Process Safety Performance
by CcpsThis book combines the synergies between performance improvement systems to help ensure safe and reliable operations, streamline procedures and cross-system auditing, and supporting regulatory and corporate compliance requirements. Many metrics are common to more than one area, such that a well-designed and implemented integrated management system will reduce the load on the Process Safety, SHE, Security and Quality groups, and improve manufacturing efficiency and customer satisfaction. Systems to improve performance include: process safety; traditional safety, health and environment; and, product quality. Chapters include: Integrating Framework; Securing Support & Preparing for Implementation; Establishing Common Risk Management Systems - How to Integrate PSM into Other EH; Testing Implementation Approach; Developing and Agreeing on Metrics; Management Review; Tracking Integration Progress and Measuring Performance; Continuous Improvement; Communication of Results to Different Stakeholders; Case Studies; and Examples for Industry
Guidelines for Investigating Process Safety Incidents
by CcpsThis book provides a comprehensive treatment of investing chemical processing incidents. It presents on-the-job information, techniques, and examples that support successful investigations. Issues related to identification and classification of incidents (including near misses), notifications and initial response, assignment of an investigation team, preservation and control of an incident scene, collecting and documenting evidence, interviewing witnesses, determining what happened, identifying root causes, developing recommendations, effectively implementing recommendation, communicating investigation findings, and improving the investigation process are addressed in the third edition. While the focus of the book is investigating process safety incidents the methodologies, tools, and techniques described can also be applied when investigating other types of events such as reliability, quality, occupational health, and safety incidents.
Guidelines for Laboratory Quality Auditing (Quality and Reliability)
by Doanld C. Singer Ronald P. UptonThis single-source reference provides practical guidance for the quality auditing of a chemical or biological testing laboratory-helping to develop or improve quality control and quality assurance programs in order to meet certification standards or pass external-source audits.
Guidelines for Laboratory Quality Managers (Integrating Food Science and Engineering Knowledge Into the Food Chain #14)
by Saverio ManninoThis useful and extensive set of guidelines is designed to assist food control laboratories in gaining accreditation from an internationally recognized external body, providing all of the necessary information and practices in an easy-to-read, step-by-step fashion. Authored by an experienced consultant for laboratory accreditation in many different countries, with this text food control lab owners now have all of the up-to-date information they need to gain accreditation in a single source. Guidelines for Laboratory Quality Managers covers the essentials for quality management in the food control laboratory, from testing processes to current quality management systems. The ISO standards for accreditation are extensively explored, including managerial requirements, organizational aspects, complaint handling procedures, internal audits, and sampling. An entire section is dedicated to the implementation of managerial and technical requirements from quality control to program monitoring and evaluation. Analysis selection, preparation, and validation is covered extensively, and an entire section is dedicated to basic statistics from data presentation to distribution. Each section comes with helpful tips for lab managers plus definitions and terms. Comprehensive, easy-to-use and up-to-date, Guidelines for Laboratory Quality Managers is the guide for accreditation for food control laboratories.
Guidelines for Managing Abnormal Situations
by CCPS (Center for Chemical Process Safety)GUIDELINES FOR MANAGING ABNORMAL SITUATIONS
Guidelines for Managing Process Safety Risks During Organizational Change, 1st Edition
by CcpsAn understanding of organizational change management (OCM) -- an often overlooked subject -- is essential for successful corporate decision making with little adverse effect on the health and safety of employees or the surrounding community. Addressing the myriad of issues involved, this book helps companies bring their OCM systems to the same degree of maturity as other process safety management systems. Topics include corporate standard for organizational change management, modification of working conditions, personnel turnover, task allocation changes, organizational hierarchy changes, and organizational policy changes.
Guidelines for Mechanical Integrity Systems
by CCPS (Center for Chemical Process Safety)In recent years, process safety management system compliance audits have revealed that organizations often have significant opportunities for improving their Mechanical Integrity programs. As part of the Center for Chemical Process Safety's Guidelines series, Guidelines for Mechanical Integrity Systems provides practitioners a basic familiarity of mechanical integrity concepts and best practices. The book recommends efficient approaches for establishing a successful MI program.
Guidelines for Performing Effective Pre-Startup Safety Reviews
by CcpsThis book provides guidance to those with responsibility for scheduling and executing a Pre-Startup Safety Review (PSSR). It outlines a protocol and tool for use by project or turnaround teams, to effectively and efficiently schedule and execute a PSSR. Integrates PSSR throughout the project/turnaround phases, with a verification check at the traditional PSSR step Supports a "right first time" and "check only once" project philosophy to eliminate surprises Features how-to checklists, hazard assessment, batch and continuous processes, validation, and documentation Includes a CD with PSSR checklists and PSSR management system examples. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Guidelines for Preparing Process Equipment for Maintenance and Return to Service
by CCPS (Center for Chemical Process Safety)This book contains comprehensive information and methodologies for preparing process equipment for maintenance and, ultimately, return to service. Specifically, this book addresses two phases of equipment handovers, providing information and tools to help personnel at manufacturing sites reduce their risks. The first phase is isolating and preparing equipment for maintenance. The second phase is returning the equipment back to service, applying specified operational readiness plans in addition to a traditional pre-startup safety review (PSSR). Topics include understanding the unique types of hazards personnel might be exposed to, planning for and executing decontamination and de-energization plans, and safely recommissioning the equipment for its return to service. Case studies, examples, and incident investigation discussions provide the reader with invaluable practical learnings that, when applied, help reduce the likelihood of another similar operational incident from occurring at their facility.
Guidelines for Probabilistic Performance-Based Seismic Design and Assessment of Slope Engineering
by Yu Huang Min Xiong Hongqiang HuThis book provides a new design and evaluation framework based on slope Stochastic Dynamics theory to probabilistic seismic performance for slope engineering. For the seismic dynamic stability safety of slope, it shifts from deterministic seismic dynamic analysis to quantitative analysis based on nonlinear stochastic dynamics, that is, from qualitative to the description of stochasticity of earthquake excitation that meet the needs in related design specification and establish a performance standard. In the nonlinear dynamic time history analysis of slope subjected to seismic ground motion, the term “randomness” is used to express the uncertainty in the intensity and frequency of earthquake excitation for slope engineering dynamic seismic performance. It mainly includes seismic design fortification standard, corresponding ground motion excitation, performance index threshold, and slope deterministic nonlinear seismic dynamic response. Even more than that, the seismic dynamic large deformation approaches of the whole process and comprehensive analysis for flow analysis after slope instability failure. Eventually, the probabilistic seismic dynamic performance of the slope engineering will be characterized by nonlinear dynamic reliability.
Guidelines for Process Hazards Analysis (PHA, HAZOP), Hazards Identification, and Risk Analysis
by Nigel HyattThis unique manual is a comprehensive, easy-to-read overview of hazards analysis as it applies to the process and allied industries. The book begins by building a background in the technical definition of risk, past industrial incidents and their impacts, ensuing legislation, and the language and terms of the risk field. It addresses the different types of structured analytical techniques for conducting Process Hazards Analyses (PHA), provides a "What If" checklist, and shows how to organize and set up PHA sessions. Other topics include layout and siting considerations, Failure Modes and Effect Analysis (FMEA), human factors, loss of containment, and PHA team leadership issues.
Guidelines for Process Safety Acquisition Evaluation and Post Merger Integration, 1st Edition
by CcpsIt is crucial for process safety professionals to be aware of best practices for post merger integration at any level. A compilation of industry best practices from both technical and financial perspectives, this book provides a single reference that addresses acquisitions and merger integration issues related to process safety. Presently, there are limited references on how to handle acquisitions in several different CCPS publications and almost no coverage of the post-merger integration issue, so this reference fills a notable gap in the coverage.